Monday 26 September 2011

This is the picture's of The Daddy at 30lb 14oz from Soake Pond.

This is the picture's of The Daddy at 30lb 14oz from Soake Pond :) caught by Tony on Celtic Baits Beast Feast www.celticbait.com

Wednesday 25 May 2011

BACA

BCAC 2011 Qualifier
Willows Farm Lake


After arriving at the venue we registered then took a good look around, we had done our homework so we new the Island end was going to be key!


When they put 2 swims in what had previously been a no fishing zone we new we had to be on pegs one to six to be in with a shout, we opted for swims 4, 3, 2, 1, 5, then the rest did not matter,It was all down to the draw! We did not draw well so opted for swim 11.




After getting the TFG force 8 bivvie up & the chairs & Rods up we waited for the first hooter this was to start marker floating and pre baiting, so we had feel around but there was nothing in the way of features just a little silty line down the lake. So we put out 1 Kg of slow sink particle and 200 grm of chopped Celtic bait boilies and waited, while everybody else in middle water was smashing bait out.






The second hooter sounded Richard got his rods out using www.pvabags.net and then I got mine out and within 10 minuets Richard had a take it was a bream so we thought with fish in front of us there was hope! my rod went 22 minutes in and a nice little carp of 7lb 2 oz this was the first carp of the competition and the cameras were round for a photo shoot with our TFG hats on and Celtic bait T shirts we were off the mark and very happy but had lost a lot of time.




We got my rod back out and waited! It was as if somebody had flicked a switch it went dead, the fish just disappeared and there was reports of fish being hauled up the Island end so we stuck to our plan and kept working the water in front of us, Richard then went to get some shut eye on the TFG comfort zone bed for the night and I was on night shift but all was quiet, come morning I had some shut eye.


That night we fished hard and the heavens opened and on with the TFG chill-out jackets to keep us dry and warm, by the morning it was obvious it would take a miracle so I got out the TFG all-rounder rod and tried to snaffle a couple of fish on the feeder but there were not even any bream about, so we fished to the hooter and gave it our best shot roll on 2012 we will try again.

Wednesday 4 May 2011

New Grazzer range of pop ups.

The new range of Hi Viz 'Grazzer' Pop ups from www.celticbait.com  Extremely buoyant so work well on chod rigs. They will be available later this year in pink and yellow 14mm round and 12mm dumbell. But we are excited and confident that the 'Grazzer' Pop ups will give every angler a huge edge!
Watch this space!

Friday 26 November 2010

Solid PVA Bags


How to tie a solid PVA bag and my preferred rig for this method.

Firstly I'm going to start with the rig it is not to complicated but I would suggest you use in-line leads for the rig to be more effective.

Rather than a lead clip set up or helicopter set up, because you want the heaviest end of the lead to bed the hook in the carps mouth.

The components you will need to tie this rig with are:-

Nash fang twister size 10
Fox micro rig rings,
TFG putty,
Korda shrink tube
Korda supernatural 18lb
Nash Triggalink.


Any other braided material, hook, putty, can be used in this rig.

But Nash Triggalink is a must as it is the only stretchy braid on the market that I know of and what makes the rig so effective, when the fish picks up your hook bait and feels the weight of the lead the carp will try and drop the hook but the stretchiness of the Triggalink will act as a shock absorber and will reduce the chance of the hook pulling.

To tie the rig you start by cutting off 4 inches of korda 18lb supernatural braid then tie a hair for your chosen bait and place your bait on the hair in this case I'm using Celtic baits 14mm Le Crunch boilie tipped with a bit of pink fake corn.

Once this is done slide on a fox micro rig ring followed by the Nash fang twister do a overhand knot to secure the rig ring in place then do a knot-less knot, I tend to do 5 to 7 turns up the shank of the hook.

Now you cut off 6 inches of Nash Triggalink and then grab the tag end of the korda supernatural braid and then tie them together by using a double grinner knot making a combi rig, cut of the tag ends to neaten up the rig then slide a bit of korda shrink tube up the braid to your hook then tie on your swivel before steaming the shrink tubing as the Triggalink will retract when it comes in contact with water and make it difficult to tie it to the swivel.

Now your rig is nearly completed but the Triggalink has poor camouflage but this can overcome by grabbing a bit of TFG putty and rubbing it up and down the Triggalink this will make it darker in colour also give it some weight to keep it to the deck and harder for the carp to detect.



Now solid PVA bagging.

I've been messing around with this a lot recently especially in France and had some nice fish whilst using this tactic.

The components you will need are.
PVA bags
Foam nugget,
The rig
2oz Flat pear lead
TFG clear leader


My preferred size of PVA bags are 70mm x 200mm these may seem big but I prefer them as they give me enough material to work with.

Now to start off grab a PVA bag then start filling it, I tend to fill about half an inch to an inch of bait Personally. With a mix of ground-bait, boilie crumb micro pellet. (The smaller the baits the tighter the bag)
Then mask your hook with a bit of PVA foam so your hook wont get any bait on the hook-point whilst filling your PVA bag.

Next thing to do is to push your hook-bait down the side of the bag and hold up the lead continue filling the bag until you get halfway up your rig then pack it down and place your lead in the bag and continue to fill and pack until your happy with the size of the bag.

The size of the lead is up to you but I usually use a 2oz flat pear lead because once you have filled the PVA bag full of bait the overall weight can be as heavy as 4oz.

Now this is the reason I like to use big bag because it can be fiddly using small bags and tying the bags tight,
Firstly spilt the seems down the side of the bag Then do one overhand knot on one side of the TFG leader and another overhand knot the other side of the leader and one more again on the other side then pull down tight and cut the tag ends to tidy up the bag and make it as aerodynamic as you can.

Also do what I like to call 'lick and stick' basically lick and stick the edges of the bag and fold them in tidily so you can cast the bag in a straight line and long distances if needed.


One of the carp caught during a trip to France on solid PVA bags 34lb 6oz

If you wish to ask any questions mail me at

Wednesday 21 July 2010

Two weeks and another French trip

Well come on the 6th August of to France again with Richard Turner, who has been exclusively testing our latest bait The Mare, with great success,this will not be added to the range until 2011 as we have promised Richard exclusivity until then but when it comes out guys get on it.

Any how I had my first blank in over 12 months at the Fendrod in Swansea some of it due to the exceptional weather on the 15th & 16th of July but more so I had my tactics all wrong!! Dan only had the one fishing on a chod rig with the G nut. Any how the web page for Celtic bait is getting there thanks George and hopefully we will be able to get some pictures up and get more functionality there so keep looking!! www.celticbait.com and bye the way we are hoping to purchase 2 bait rolling machines one in late September and one early 2011 followed by a intense advertising campaign in all the main carp magazines, so again get on the Celtic bait it gives you an unfair advantage.